Peristaltic pump of dryers is using for delivering liquid from one container to 2 fluid nozzle mounted on drying chambers. Compressed air from compressor is supplied to nozzle, which results in atomization of fluid into a fine spray. Air in the blower gets heated with the help of an electrical air heater which blows through drying chamber. Drying is very fast because of large surface area which decreases temperature. In cyclone separator, dry powder particles gets separated from which gets collected in glass collection bottle. And, the exhausted air is released through a flexible SS hose into the atmosphere. In addition to this, a bag filter is also provided for secondary powder collection as per the requirement of clients.
These dryers are easy to operate fitted with inlet air temperature which is precisely controlled by the inlet temperature PID controller.
Panel includes:
Evaporation rate of water at inlet temperature of 250 C | Approx 1500 ml/hr. |
Air inlet temperature range | Up to 250 C |
Heater capacity | 3 kwh |
Spray system | 2 Fluid nozzle |
Spray / Hot air flow | Downward Co-current/ Upward counter co-current |
Air compressor | Inbuilt |
Power supply | 230V-50Hz. 15Amps |
Dimensions | 230V-50Hz. 15Amps |